Disc Separator Used For The Recovery And Purification Of Lubricating Oil And Engine Oil

Introduction:

The disc centrifuge is a type of vertical centrifuge. The drum is installed at the upper end of the vertical shaft and is driven by an electric motor through a transmission device to rotate at high speed. Inside the drum, there is a set of disc-shaped parts - discs - that are nested on top of each other. The function of the discs is to shorten the settling distance of solid particles (or liquid droplets) and increase the settling area of the drum.

Application:

The two most typical applications of three-phase disc centrifuges are as follows: First, the degumming and desoaping processes in the refining of vegetable oil; Second, skim the milk. Of course, this type of centrifuge is also widely used in other liquid-liquid-solid three-phase separations, such as the cold-pressed Sichuan pepper oil process, cold-pressed coconut oil extraction, sea buckthorn oil production, fish oil, shrimp oil and other animal oil extraction processes, as well as the recovery and purification of cutting fluids and other lubricating oils and engine oils in the chemical industry. The two-phase disc centrifuge is mainly suitable for liquid-solid separation where the solid content is between 1% and 15% and the diameter of solid particles is greater than 0.5 microns. For example, the clarification of dairy products (milk purifier).

Technical parameters: